Strapping Machines for Clothing Warehouses

Banding machines that secure cartons, bundles and pallet loads with plastic or steel strap.

Strapping — also called banding — wraps a tight band of plastic or steel around a carton or a pallet load and seals it, holding the contents together as one secure unit. A strapping machine feeds the strap around the load, pulls it to a set tension, seals or welds the ends and cuts it, in a few seconds and to the same tightness every time. In a clothing warehouse, strapping closes the loop on packing: cartons of garments are bundled for handling, master cartons are secured for shipping, and pallet loads are held together so they travel as a unit instead of a stack of separate boxes.

Automatic arch strapping machine banding a stack of clothing cartons at a warehouse packing station

Types of Strapping Machine

The range runs from hand work to fully automatic lines. Hand tools — a tensioner, a sealer and a pair of cutters, or a single battery-powered combination tool — strap loads wherever they stand and suit low volumes and pallet work. Tabletop and semi-automatic machines sit at a packing bench: the operator passes the strap around the carton by hand and the machine tensions, seals and cuts it. Arch (fully automatic) machines pass every carton through a fixed arch; the strap is fed automatically around the arch, so the operator simply places the carton, presses a button or triggers a switch, and removes a strapped carton a few seconds later — the standard machine of a busy apparel packing area.

In-line strapping systems go further, strapping cartons as they pass on a conveyor without an operator at all, and pallet strappers apply vertical or horizontal straps to whole pallet loads, with a lance that passes through the pallet void or compression that presses the load down while it is strapped. Strapping heads, feeders and dispensers are also supplied as components for machinery builders integrating strapping into case packers and palletizing lines.

The strap itself is half the system. Polypropylene strap is the economical everyday choice for cartons; polyester (PET) strap holds tension longer and is the usual plastic choice for pallet loads; steel strap remains the strongest option for heavy, sharp-edged or high-tension work. Seals are made by metal clips, heat seals or friction welds, and the machine, the strap width and thickness, and the seal type must be specified as a set — a machine set up for one strap will not run another reliably.

Strapping Clothing Cartons and Pallet Loads

Garment cartons set the tension question. They are light, often springy, and easily crushed at the corners, so strapping for apparel work is about containment, not compression: enough tension to keep the carton closed and the bundle together, applied over edge protection where straps cross carton corners on stacked loads. Too little tension and the strap falls off in handling; too much and it cuts into the carton and creases the garments at the top of the box — the fault is visible the moment the store opens it.

Bundling is the other everyday apparel job. Several smaller cartons, or a stack of flat-packed garment packs, are strapped into one handling unit for the stockroom or the store delivery. Strapping also closes the master cartons that carry polybagged garments, secures cartons to pallets as part of load stabilisation alongside stretch film, and bands fabric rolls and textile bundles whose shape no carton fits. Each use wants its own tension and strap choice stored in the machine's settings where the machine allows it.

Reliability at a packing bench is a housekeeping matter as much as a mechanical one. Strap offcuts and dust jam feed tracks, worn guides misfeed, and the wrong coil loaded in a hurry stops the bench. Automatic machines in the suppliers' ranges below are built for high cycle counts, but the warehouses that get those counts keep the strap path clean, use the specified strap, and keep a hand tool at the bench for the loads that do not fit the arch.

Strapping Machine Companies

Hangzhou Youngsun Machinery Co. Ltd

Hangzhou Youngsun Machinery was set up in 1983, specialising in the manufacture of labelling machines, case erectors, case packers, case sealers, strapping machines, palletizers, wrapping machines and belt and roller conveyors, as well as customised packing production lines. The company has established business relations with many renowned clients, such as Dell, Haier and Lenovo.

Supplies: Strapping machines within complete packing production lines

Joinpack

Joinpack (Jia-In, Taiwan) is a specialist strapping machine manufacturer of many years' standing; through its employees' work on technical research and quality promotion, Jia-In has become a top-quality strapping machine manufacturer, and also supplies carton sealers.

Supplies: Strapping machinery and carton sealers

PAC Strapping Products Inc.

Founded in 1982, PAC Strapping Products, Inc. is a full-service manufacturer and supplier of plastic strapping, plastic strapping machines and systems, and steel strapping, along with tools and accessories for both plastic and steel strapping. PAC focuses on providing value through a full line of quality products, on-time delivery, competitive pricing and innovative solutions.

Supplies: Plastic and steel strapping, strapping machines, systems, tools and accessories

Sealers India

Sealers India, the one-stop packaging company based in Chennai, manufactures all types of packaging machinery and packaging materials and specialises in fill and seal, stitching and strapping machines. The company manufactures semi-automatic carton strapping machines and fully automatic carton strapping machines, and also shrink wrapping machines, and deals in packaging materials including PVC films, moulded blisters, cups, bottles and trays.

Supplies: Semi-automatic and fully automatic carton strapping machines, shrink wrapping machines

Taizhou Xutian Packing Machine Co., Ltd

Taizhou Xutian Packing Machine Co., Ltd is a professional strapping machine manufacturer in China, selling and exporting more than 3,000 sets of strapping machines and other packaging machines every month. The large-scale company specialises in packing, strapping, sealing, wrapping and shrinking machines, maintains an R&D department for product development and quality improvement, passed ISO9000:2000 in February 2003, and holds CE certification from the European Electricity Association for its XT strapping machine series.

Supplies: Strapping machines, sealing, wrapping and shrinking machines

Choosing Strapping Equipment

Count the straps, then choose the automation. A bench strapping a few dozen cartons a day is well served by a semi-automatic machine; several hundred a day justifies an arch machine; a conveyor-fed packing line justifies in-line strapping, and pallet work adds a pallet strapper or battery hand tools. Then match strap material to the load — polypropylene for cartons, polyester for pallets, steel only where its strength is genuinely needed — and confirm the machine is supplied and serviced for that strap.

The suppliers listed below cover the field from different directions: full packing-line manufacturers for whom strapping is one machine among case erectors, packers, sealers and wrappers; dedicated strapping specialists making the strap, the machines and the tools as one system; and packaging machinery houses supplying semi-automatic and fully automatic carton strapping alongside shrink wrapping. For the strap and materials themselves, the strapping materials page linked below is the companion to this machinery directory.

Common Questions

What is the difference between a semi-automatic and an automatic strapping machine?

On a semi-automatic machine the operator passes the strap around the carton by hand, and the machine tensions, seals and cuts it. On an automatic arch machine the strap is already fed around a fixed arch, so the operator only positions the carton and triggers the cycle — much faster at packing-bench volumes. Fully automatic in-line systems strap cartons on a conveyor with no operator at all.

Which strap should a clothing warehouse use — plastic or steel?

Plastic covers nearly all apparel work: polypropylene strap for cartons and bundles, and polyester (PET) strap where a pallet load needs tension that holds over a journey. Steel strap is reserved for heavy, sharp-edged or very high-tension loads, which garments rarely are. The machine must be set up for the exact strap material, width and thickness being run.

How tight should strapping be on garment cartons?

Tight enough for containment, not compression. The strap should hold the carton closed and the bundle together without biting into the carton corners or creasing the garments at the top of the box. Edge protectors under the strap help on stacked loads, and the correct tension is the one that survives handling while leaving the carton square and undamaged.

Related Warehouse Resources

More from Apparel Search: Warehouse Directory  |  Fashion Terms  |  Fashion Companies  |  Fashion Influence  |  Fashion Industry
You are here: Apparel Search » Warehouse Directory » Machinery » Strapping Machines