Striped and multicolor woven tapes for sportswear, uniforms and decorative garment trim.
Multi color tape is woven tape that carries its color in the weave: two or more yarn colors arranged across the width so the finished tape shows stripes, bands or checks along its length. Unlike a plain tape that is dyed or printed afterward, a woven multi color tape has the same pattern on both faces, color that cannot rub or wash off the surface, and crisp stripe edges that printing struggles to match at narrow widths.
This page is a sourcing guide for striped and multicolor woven tapes in garment manufacturing. It explains how the pattern is built into the tape, where team, workwear and fashion buyers use it, and what to specify — stripe layout, color standards and colorfastness — when ordering. The manufacturer listed below produces multi color tape within its narrow fabrics range.

A striped tape is patterned at the warping stage: the warp yarns are laid out across the width of the tape in the exact color sequence of the design, so a wide center stripe, two pinstripes or a rainbow sequence is simply a matter of how the colored yarns are arranged before weaving begins. The weft is usually a single ground color chosen to support the design. Because the pattern is structural, it repeats perfectly along any length of tape and appears identically on the back.
Yarn-dyed color is what gives woven multi color tape its durability advantage. Each yarn carries its color through its whole thickness, so abrasion, laundering and sunlight act on dyed fiber rather than on a surface print. Factories weave multi color tapes in cotton, polyester, nylon and rayon, and the fiber choice decides how the tape should be matched to the garment it will trim.
Sportswear is the largest garment market: striped tape runs down the side seams of track pants and shorts, edges team jerseys and warm-up jackets, and carries club, school and national colors where the stripe itself is the identity of the garment. The same logic applies to uniforms and workwear, where a company-color stripe on a cuff, collar or apron tie quietly brands an otherwise plain garment.
Beyond teams and uniforms, striped and multicolor tapes trim children's clothing, casual shirts, bags and headwear, form the webbing of straps and belts, and serve as lanyards, medal ribbons and award tapes where a color sequence carries meaning. Anywhere a narrow band of permanent, washable color is needed, a woven multi color tape does the job without a print setup.
Because the tape is a design element, color control is the heart of buying it. Stripes should be matched against the buyer's color standards under agreed lighting, and matched to the garment fabric they will sit against — a stripe that matches its standard but clashes with the shell fabric is still a failed trim. Yarn-dyed polyester offers the strongest wash and light fastness for sportswear; cotton stripes give a softer, more traditional hand for casual garments but need their fastness confirmed for the garment's wash standard.
Dark-against-light stripe combinations deserve a specific check for color migration in washing, since a saturated red or navy yarn next to a white yarn is exactly where bleeding shows. Reputable narrow fabric producers test and state fastness for their standard ranges, and a bulk order should be approved from a production dye lot, not only from a shade card.
A complete order names the tape width, fiber, stripe layout (the width and color of each stripe across the tape, in order), the color standard for each yarn color, and the quantity in continuous rolls. For a custom stripe, expect the supplier to produce a woven sample for approval before bulk weaving, and build that sampling time into the garment's critical path.
Stock striped tapes in common colorways are widely available and cheaper than custom weaving, so check the standard range first when the design allows it. The manufacturer listed below weaves multi color tape alongside cotton tape, elastic tape, jacquard tape, satin tape and knitted tape, which suits buyers consolidating several narrow fabric items with one supplier.
Producers of striped and multicolor woven tapes and related narrow fabrics.
Located in India, Shivam Narrow fabrics is an upcoming company that prides itself on producing superior products with faultless deliveries. They have made a distinctive mark for themselves by producing export quality products that are at par with international standards.
The pattern is woven in, not printed on. Colored warp yarns are arranged across the width of the tape in the sequence of the design before weaving, so the stripes run the full length of the tape, appear on both faces and cannot rub off like a surface print.
Sportswear and team uniforms are the biggest uses — side stripes on track pants, edging on jerseys and jackets in club or school colors — along with workwear branding, childrenswear trim, straps, lanyards and medal ribbons.
Width, fiber, the stripe layout in order (each stripe width and color), the color standard for every yarn color, and colorfastness suitable for the garment wash standard. Custom stripes should be approved from a woven sample before bulk production.