Slide Electronic Yarn Control Devices for Textile Machinery

Textile and clothing machine spare parts — what the part does, how to specify it, and the companies that supply it.

A slide electronic yarn control device is part of the electronic supervision fitted along the yarn path of a circular or flat knitting machine. Where a mechanical stop motion waits for yarn to pull or fall, an electronic control unit watches the yarn continuously as it feeds - sensing its presence and movement and signalling the machine the moment the feed goes wrong, before missing yarn can knit into the fabric as a hole, a dropped course or a press-off. Yarn control electronics are standard spare parts on modern knitting machines, replaced by unit and matched to the machine's control system.

Slide Electronic Yarn Control Devices for textile machinery — spare parts in a textile machinery workshop

Yarn Control on the Knitting Machine

Yarn faults reach the needles fast. A broken end, an empty package, a yarn trapped on the creel or a feed that has stopped moving will all produce defective fabric within seconds at production speed, and the further the fault knits in, the more fabric is wasted when the machine is finally stopped by hand. Electronic yarn control devices close that gap: the yarn passes through or past the sensing point as it slides toward the feeder, and the device keeps the machine running only while the yarn signal stays healthy. When the signal fails, the device triggers a stop in time to keep the fault at the needles rather than metres into the roll.

Control devices sit within a family of yarn supervision equipment from the same makers: supervisors that react when yarn drops, supervisors that react when yarn tears, combined tearing-and-drop supervisors, yarn sensors, and yarn retainers that hold yarn correctly at stop and start. Specifying a replacement means matching the device to the machine make, the yarn position it monitors and the stop circuit it feeds.

Fitting and Maintaining Yarn Control Devices

Electronic units live in a hostile spot for electronics - lint, oil mist and vibration surround the yarn path - so housings and sensing faces are kept clean as part of routine machine care, and a device that gives false stops is cleaned and its yarn path checked before it is condemned, since a mis-threaded yarn or a fouled sensor mimics an electronic fault. Genuine failures are swapped as complete units; the machine's other supervisors are tested at the same stop. The Italian maker listed below builds slide electronic yarn control devices as part of its range of parts for circular and flat knitting machines, alongside its yarn supervisors, sensors and retainers.

When a knitting plant standardises on one maker's supervision family, the benefit shows at breakdowns: devices share connectors, stop circuits and set-up habits, so a technician who knows one unit can prove the others, and the spares shelf stays small. Plants running older machines also retrofit electronic control at the worst fault positions first - the feeds and yarn paths that have historically produced the most holes and press-offs - and extend coverage machine by machine as the fault records justify it.

Companies Supplying Slide Electronic Yarn Control Devices

RMB Massardi

RMB Massardi (Italy) manufactures parts for circular and flat knitting machines, with yarn control at the centre of the range: slide electronic yarn control devices, yarn supervisors by drop, by tearing and by tearing and drop, yarn sensors and yarn retainers. The range also includes safe needles, bulb sockets and electric shears.

Supplies: Slide Electronic Yarn Control Devices · Yarn Supervisors · Yarn Sensors · Yarn Retainers · Safe Needles · Electric Shears

Related Guides and Resources

Common Questions

What does an electronic yarn control device do?

It monitors yarn as it feeds toward the needles and signals the machine to stop the moment the yarn breaks, runs out or stops moving, so the fault is caught at the needles instead of knitting into a length of defective fabric.

How is it different from a yarn supervisor?

The terms overlap in makers' catalogues: supervisors are the stop-motion units that react to a yarn dropping or tearing, while slide electronic yarn control devices are the electronic control units in the same supervision system. A machine typically carries several types along its yarn paths.

Why does a yarn control device give false stops?

Usually a fouled sensing face, a mis-threaded yarn path or lint and oil mist around the unit rather than an electronic failure. Cleaning the device and checking the yarn run is the first step before replacing it.

More from Apparel Search: Textile Machinery  |  Manufacturing  |  Fashion Terms  |  Fashion Companies  |  Fashion Influence  |  Fashion Industry
You are here: Apparel Search » Textile Machinery » Textile Machinery Spare Parts » Slide Electronic Yarn Control Devices