Textile and clothing machine spare parts — what the part does, how to specify it, and the companies that supply it.
Loop forming elements are the components that physically make the stitch: the needle that draws the new loop, the sinker that holds the fabric and forms the loop's length, the jack and selector elements that decide which needles work. They are the most numerous and most frequently replaced parts on a knitting machine — a full needle set runs to thousands — and their precision, in hardened and polished steels, is what stands between yarn and saleable fabric.

In weft knitting, the latch or compound needle rises to clear the old loop, receives the new yarn, and draws it through; sinkers control the held fabric and the knock-over that sizes the loop; jacks and selectors transmit the pattern's decisions to individual needles. Each element is a small engineered part — hook geometry, latch action, shank and butt form all machined to hundredths — and each wears where it contacts yarn, cams or its neighbours. The Kern-Liebers group produces knitting elements as one of its core textile lines, alongside springs and fineblanked and stamped parts, from 34 companies worldwide with approximately 4,000 employees.
Elements are changed on condition and in disciplined sets: a hooked or burred needle cuts yarn and drops stitches; a worn sinker edge disturbs loop length; mixed old and new elements in one working zone knit visibly differently. Mills track breakage by position — repeated failure at one point indicts the cam, cylinder trick or dial slot behind the element, not the element itself — and they buy elements from makers whose steel and finish match the original specification, because element quality shows directly in fabric barré and needle-line faults. Specification is always machine maker, model, gauge and element type; nothing in this family is generic.
Within the Kern-Liebers Group (Germany), 34 companies worldwide produce springs, fineblanked and stamped parts and knitting elements — including loop forming elements — with approximately 4,000 employees worldwide. The group's textile range also covers stamped bent parts and knitting machinery spare parts as a whole.
Supplies: Loop Forming Elements · Knitting Elements · Springs · Fineblanked Stamped Parts
The needles, sinkers, jacks and selector elements that together form each stitch — the components that contact yarn and fabric at the knitting point.
Old and new elements knit differently — loop size, surface and breakage behaviour vary with wear — so working zones are renewed together to keep fabric even.
Usually a fault behind the element — a damaged cam track, cylinder trick or dial slot at that position — rather than bad elements. The position, not just the part, should be investigated.