Textile and clothing machine spare parts — what the part does, how to specify it, and the companies that supply it.
Heavy textile machinery shakes its building: a battery of looms or a hydraulic press transmits vibration through the floor to neighbouring machines, instruments and the structure itself — and receives vibration back, disturbing its own settings. Mounting pads are the engineered answer: load-bearing elastomer pads placed under machine feet that isolate vibration and absorb shock, reduce noise, and let machines be installed without bolting into the floor. They are a small line item with mill-wide consequences, supplied both as a pad maker's speciality and within loom-parts ranges.

A pad isolates by deflecting under load: its material hardness — measured in shore durometer — and its thickness are matched to machine weight per foot and the disturbing frequency, so the mounted system's natural frequency sits well below the machine's forcing frequency. Kellett Enterprises, listed below, has built its name on this over more than 40 years with the LP-13 Shake Absorber vibration and isolation pad. Its range runs in two durometers: LP-13/70, the original pad at a nominal 70 shore (typically measuring 75), used for heavy equipment such as weaving machines, granulators and hydraulic presses; and the LP-13/50, the softer addition to the line for lighter loads. Tranoco's machinery range lists mounting pads for isolating and reducing vibration alongside its beams and loom parts.
Pads go under each machine foot on a clean, level bearing surface, sized so each pad carries its share of the machine's weight within its rated deflection; the machine is then levelled and settled before alignment checks. Done well, isolation cuts structure-borne noise, protects neighbouring precision equipment — and the building — and removes anchor-bolt damage to floors, which also makes machines easier to relocate in layout changes. Pads are inspected as part of machine maintenance: an overloaded or oil-degraded pad loses deflection and silently returns the vibration it was fitted to stop. Kellett can be reached through its site or at info@kellettent.com for pad selection by machine and load.
For over 40 years, Kellett Enterprises, Inc. has become known around the world for the LP-13 Shake Absorber vibration and isolation pad; vibration isolation and noise reduction are the primary focus of its manufacturing process. The pads come in two shore durometers: LP-13/70, the original LP-13 pad (nominal 70 shore, typically measuring 75), used for heavy equipment such as weaving machines, granulators and hydraulic presses; and the newer LP-13/50 addition to the line. E-mail: info@kellettent.com.
Supplies: Mounting Pads · Vibration Isolation Pads · LP-13 Shake Absorber
Tranoco (USA) supplies machinery mounting pads for isolating and reducing vibration within its textile machinery spare parts range, which also covers beams for all types of weaving machines, warper beams, beam heads, canisters and miscellaneous loom parts.
Supplies: Mounting Pads · Beams · Beam Heads · Loom Parts
They isolate the machine's vibration from the floor — absorbing shock, cutting structure-borne noise, and protecting neighbouring machines and the building — while supporting the machine without anchor bolts.
By machine weight per foot and vibration frequency. Kellett's LP-13 range offers two durometers: the firmer LP-13/70 for heavy equipment such as weaving machines and hydraulic presses, and the softer LP-13/50 for lighter loads.
They need inspection: an overloaded, oil-degraded or fully compressed pad stops deflecting and stops isolating. Pads are checked when machines are levelled or moved.