Textile and clothing machine spare parts — what the part does, how to specify it, and the companies that supply it.
Warp knitting builds fabric from a sheet of warp yarns, each needle looping its own thread while guide bars lay the yarns into the structure — the technology behind tricot, Raschel lace, nets, spacer fabrics and many technical textiles. The machines run at high speed with thousands of individual knitting elements, and their spare parts span everything from a single needle to complete pattern drives and beams. This page brings together the two routes a warp knitter uses: a specialist in pre-owned warp knitting machinery and parts, and a maker supplying the full range of replacement parts for the two best-known machine builders.

The loop-forming elements come first: knitting needles, tongue units, sinker units, guide units, separator units and trick plate units, all working in gauge across the machine width. Patterning follows: pattern discs, pattern wheels and chain links for mechanical pattern drives, and piezo guides for electronically controlled guide bars. Then come the supporting parts — threading combs, needle bars, sliders, tension plates and KFD tension devices, gears, bearings, belts, springs, jacks, beams and the small hardware, handles and wrenches that keep a machine complete. Huaxia Ystex, listed below, supplies all kinds of spare parts for KARL MAYER and LIBA warp knitting machines across exactly these families.
Because warp knitting elements are gauge-specific and maker-specific, parts are ordered by machine model, gauge and element type; a guide unit or needle made for one system cannot be adapted to the other.
Alongside new replacement parts stands the pre-owned market. D&S International, listed below, is a worldwide leader in pre-owned used warp knitting machinery and parts for the textile industry, and has specialised in serving the worldwide warp knitting industry since 1982. For mills running older KARL MAYER or LIBA machines, a pre-owned specialist can be the practical source both for complete machines to extend a line and for parts that keep existing machines earning. The sensible spares strategy combines both routes: new elements from a range supplier for the wear parts that decide fabric quality, and the pre-owned channel for major units, pattern equipment and hard-to-find items for older models. Whatever the route, the specification discipline is the same: machine maker and model, year where patterns changed, gauge, working width and the exact element designation, checked against the machine's own parts book before ordering. Warp knitting elements are small, numerous and easily confused between gauges that differ by a fraction, and a wrong delivery costs more in machine standing time than the parts themselves, so mills keep one machine's elements in labelled stock, separate from every other gauge they run. Storage matters for these parts as much as for needles anywhere: elements are kept oiled or in their protective packing, in dry conditions, because a corroded guide or needle is scrap before it is ever fitted, however correct its specification. Fitted elements are then run in and checked on the first fabric off the machine before full production resumes.
D&S International is the worldwide leader in pre-owned used warp knitting machinery and parts for the textile industry. Since 1982, D&S International has specialized in serving the worldwide warp knitting industry.
Supplies: Pre-Owned Warp Knitting Machinery · Warp Knitting Parts
Huaxia Ystex Industrial Co., Ltd. supplies all kinds of spare parts for KARL MAYER and LIBA warp knitting machines: knitting needles and tongue units, guide units, sinker units, trick plate units and separator units, threading combs, pattern discs and pattern wheels, chain links, piezo guides, needle bars, gears, bearings, belts, beams, tension devices, springs and jacks, together with smaller items such as oil bellows, needle covers, sliders and steel wire rope.
Supplies: Warp Knitting Needles · Guide Units · Sinker Units · Pattern Discs · Piezo Guides · Needle Bars · Gears and Bearings
The range listed here covers KARL MAYER and LIBA warp knitting machines — needles, tongue, guide, sinker, trick plate and separator units, pattern equipment and drive parts made to those makers patterns and gauges.
A guide controlled by a piezoelectric element, used on electronically patterned warp knitting machines to move individual guides precisely for pattern effects, replacing or supplementing mechanical pattern discs, wheels and chain links.
Pre-owned machines and parts extend the life of established tricot and Raschel lines at lower cost, and specialists in the trade can source complete machines and parts for older models that are no longer in current production.