Textile and clothing machine spare parts — what the part does, how to specify it, and the companies that supply it.
A beam head is the flange fitted to the end of a weaving beam — the large cylinder that holds the warp yarn on a loom, or the wound cloth and felt on delivery beams. The head keeps the yarn package in shape as it winds and unwinds, guides the edges of the sheet of yarn, and carries the drive and braking loads of the beam. Because beams run at production speed under tension, a damaged, warped or wrongly sized beam head shows up immediately as uneven tension, selvedge damage and broken ends, which is why beam heads are a standard replacement and spare item in weaving mills.

The warp beam holds hundreds or thousands of warp ends wound side by side. As the loom lets off warp, the beam rotates against a brake so every end stays at working tension. The beam heads at each end act as the package flanges: they stop the outer layers of yarn slipping sideways, protect the edges of the package during handling and transport, and give the beam its rolling and lifting surfaces. On cloth and felt beams the same flanges protect the wound fabric. Beam heads are made in steel and in lighter alloys, sized by flange diameter, barrel diameter, bore and the drive arrangement of the loom they fit.
Fit is everything. A replacement head must match the beam barrel it mounts on, the loom maker's drive and brake arrangement, and the width and diameter of package the mill runs. Heads for heavy industrial weaving — papermakers' felt looms are the extreme case — are substantially built, because the packages are wide, heavy and run under high tension.
When ordering spare beam heads, mills work from the loom make and model, the beam's barrel diameter and length, the flange diameter, and the bore and keyway or drive-dog pattern. Keeping a matched spare set on hand avoids a loom standing idle while a bent head is straightened or a cracked flange is welded and re-machined. In service, heads should be checked for flange run-out, edge damage that could snag yarn, and corrosion; edges are dressed smooth, and beams are stored on their heads only where the flange is designed to take the weight. The supplier listed below covers beam heads alongside warper beams, beams for all types of weaving machines, canisters and parts for papermakers' felt and velvet and upholstery weaving machines.
Tranoco (USA) supplies textile machinery spare parts and equipment including mounting pads for isolating and reducing vibration, beams for all types of weaving machines, canisters, papermakers' felt looms, warper beams and beam heads. The range also covers parts for papermakers' felt weaving machines (Jäger, Jurgens and Texo), Flexhold yarn package adapters and holders — one adapter fits most any size cone or tube — parts for velvet and upholstery weaving machines (Van De Wiele, Guesken and Gunne MAV / SACM Dornier), and miscellaneous loom parts including harness frame parts, pulleys and ceramic thread guides.
Supplies: Beam Heads · Warper Beams · Beams for Weaving Machines · Mounting Pads · Ceramic Thread Guides · Pulleys
A warper beam is a complete beam — barrel plus its two heads or flanges — as used on a warping machine to build the warp package. A beam head is the flange component itself, bought as a spare or replacement to fit an existing barrel, or as part of a beam built to order.
Measure the barrel diameter and length, the required flange diameter, and the bore and drive pattern, and confirm the loom make and model. Beam heads are machine-specific: a head bored for one maker's drive and brake arrangement will not fit another's.
A bent or damaged flange lets the yarn package shift and changes tension at the edges of the warp, which causes broken ends, uneven let-off and selvedge faults. True-running, smooth-edged heads keep the package stable from full beam to empty.