Textile and clothing machine spare parts — what the part does, how to specify it, and the companies that supply it.
Cams are the shaped steel tracks that run a knitting machine. As the cylinder or dial rotates, each needle's butt travels through the cam track and is raised to clear, drawn down to knit, or held to tuck or miss — so the cam profile is, in effect, the machine's stitch programme in metal. Cam wear changes stitch length and fabric quality long before a cam actually fails, which makes cams one of the most quality-critical spare parts on circular and hosiery knitting machines.

A cam system for one feed includes stitch cams that set loop length, raising (clearing) cams, tuck and miss cams, and the sinker cams that time the holding-down sinkers. The parts are machined from high-quality tool steel to very tight tolerances and hardened, because millions of needle butts strike and slide along the track every shift. Vanguard Pai Lung, listed below, machines its cams in its own plant to the most restricting tolerances and inspects them there, keeping the most up-to-date cam track patterns available; its engineering department will help with cams for a special fabric a mill wants to knit.
Camboxes on hosiery machines package the cams for each feed into one assembly, and specialists such as Inchlines of Leicester build their business on camboxes, cams, feeders and yarn carriers for these machines.
Cam tracks wear polished, then stepped, where needle butts change direction; the symptoms are stitch-length drift, barré and increased needle breakage. Worn cams can sometimes be reground, but the profile must stay true to pattern, so most mills replace in matched sets per feed and keep the removed set as emergency spares. Adjacent parts matter too: Inchlines reports continuing success with its Self Grip Wheel feed wheel for large-diameter fabric machines, and its yarn-carrier refurbishing service gives carriers a special ceramic coating — increasingly needed on machines knitting abrasive yarns, where the coating has proved successful in giving carriers a longer life. Order cams by machine make, model, diameter, gauge and feed position, and by the track pattern where the maker offers options.
Inchlines Ltd, the Leicester-based textile engineers, design and manufacture parts and accessories for circular knitting machines, and are specialists in hosiery machine camboxes, cams, feeders, yarn carriers and accessories. Their Self Grip Wheel feed wheel is extensively used on large-diameter fabric machines, and their refurbishing service gives yarn carriers a special ceramic coating that extends carrier life on machines knitting abrasive yarns.
Supplies: Cams · Hosiery Camboxes · Feed Wheels · Feeders · Yarn Carriers
In 2009 Pai Lung Machinery Mill Co. Ltd. acquired the historic Vanguard Supreme Machinery Company, forming Vanguard Pai Lung, a name in the knitting industry built on over 100 years of innovative research and high-quality knitting machines. Its plant produces cylinders and cams: cylinders, top rings, sinker dials and rib dials of the highest quality, and cams made of high-quality tool steel to the most restricting tolerances, machined and inspected in its own plant.
Supplies: Cams · Cylinders · Sinker Dials · Rib Dials · Top Rings
High-quality tool steel, machined to tight tolerances and hardened. The track faces millions of needle-butt contacts, so hardness and an accurate, smooth profile are what give a cam its working life.
When stitch length drifts between feeds, fabric shows barré that needle changes do not cure, or the track shows visible stepping where needle butts change direction. Cams are normally replaced in matched sets for a feed.
Yes — specialists strip and re-coat carriers, for example with a ceramic coating that resists abrasive yarns and has proved successful in giving carriers a longer life on circular fabric machines.