Textile and clothing machine spare parts — what the part does, how to specify it, and the companies that supply it.
The cylinder is the heart of a circular knitting machine: a precision steel barrel whose vertical slots — tricks — carry the needles around, guided by the cams. Its diameter (from 10 inches to 42 inches in the range below) and gauge set the machine's fabric width and fineness, and its accuracy sets the ceiling on fabric quality. Cylinders are long-life parts, but trick walls wear, slots damage, and a knitting plant changing gauge or rebuilding a machine needs cylinders made to the machine maker's pattern — the specialist trade this page lists.

Peverada of Italy produces cylinders, dials and sinker rings from 10-inch to 42-inch diameter in any gauge, drawing on twenty years of experience and cooperation with the leading Italian and European circular knitting machine manufacturers. Its cylinders are noted for high precision — cylinders and dials can be fitted in any position, with no 'zero' mark — and for long life from induction heat treatment, with all corners, especially above the trick walls, rounded. Those details matter at speed: rounded, hardened trick walls guide needle hooks without snagging, and positional freedom simplifies fitting and timing.
Taiwan (Quanzhou) Jiasheng — Classic Precision Knitting Cylinder Co. — produces knitting cylinders known for high quality at a reasonable price, and Vanguard Pai Lung's plant produces cylinders, top rings, sinker dials and rib dials of the highest quality as the matching components of the same knitting head.
Order cylinders by machine make and model, diameter, gauge, and needle and sinker arrangement; dials and sinker rings must match the cylinder's specification, which is why makers supply them as a family. In service, cylinders are damaged more by handling and corrosion than by honest wear: keep tricks clean and oiled, never lever against trick walls when changing needles, and investigate any repeated needle breakage at one position — it usually marks a damaged trick. A cylinder that has lost accuracy shows as vertical streaks (needle lines) in the fabric that no needle change cures, and reconditioning or replacement is then the only route. The SMC listing covers the other cylinder family found on textile machinery — pneumatic cylinders that drive machine motions.
Peverada snc (Italy) produces cylinders, dials and sinker rings from 10-inch to 42-inch diameter in any gauge. Twenty years of experience and cooperation with the most important manufacturers of circular knitting machines, both Italian and European, has produced a high-quality product: high precision (cylinders and dials can be fitted in any position — no 'zero' mark) and long life due to induction heat treatment, with all corners, especially above the trick walls, rounded.
Supplies: Cylinders · Dials · Sinker Rings
Quanzhou Jiasheng Machine Co. Ltd. — Taiwan (Quanzhou) Jiasheng Classic Precision Knitting Cylinder Co. Ltd., located in Quanzhou City, Fujian province — produces knitting cylinders, famous for high quality and reasonable price. Enquiries: knitting5299@yahoo.com.cn.
Supplies: Knitting Cylinders
Vanguard Pai Lung's state-of-the-art cylinder manufacturing plant produces cylinders, top rings, sinker dials and rib dials of the highest quality available; its cams are made of high-quality tool steel to the most restricting tolerances, machined and inspected in its own plant. The company was formed in 2009 when Pai Lung Machinery Mill acquired the historic Vanguard Supreme Machinery Company, and builds on over 100 years of knitting industry research.
Supplies: Cylinders · Cams · Sinker Dials · Rib Dials · Top Rings
SMC is listed for cylinders — the pneumatic cylinder family used to drive motions across textile and apparel machinery.
Supplies: Cylinders
Circular knitting cylinders are made across the machine diameter range — the Italian maker on this page produces them from 10-inch to 42-inch diameter, in any gauge, matched to the machine model.
It hardens the working surfaces — especially the trick walls that guide the needles — for long life, while the precision machining and rounded corners above the trick walls protect needle hooks at running speed.
Persistent vertical needle lines at fixed positions that survive needle changes usually mark damaged trick walls or lost cylinder accuracy at those positions.