Patterning for Textile Machinery

Textile and clothing machine spare parts — what the part does, how to specify it, and the companies that supply it.

Before electronic controls, textile machines were programmed in metal: pattern wheels and pattern chains whose links and segments, read by feelers as the machine turns, command the guide bars, selectors and motions that create the pattern. Huge fleets of warp knitting and other machines still run on this mechanical patterning, and its wheels and chains — made complete, in all sizes, for every machine type — remain a living spare parts trade.

Patterning for textile machinery — spare parts in a textile machinery workshop

Pattern Wheels and Chains at Work

A pattern chain is an endless loop of links of different heights assembled to the pattern's repeat; as it passes the reading mechanism, each link's height sets the movement of a guide bar or motion for that course. Pattern wheels do the same job in rotary form for other mechanisms. The craft is in the assembly: links must be the right heights in the right order, and a finished chain or wheel is a precise, machine-specific article, not a generic length of chain. Betex of Germany, listed below, supplies pattern wheels and pattern chains in all variations — complete and ready for use, in all sizes, and for every type of machine — within its warp knitting parts range.

Patterning Parts and the Machines They Serve

Patterning parts belong mainly to warp knitting — tricot, Raschel and stitch-bonding machines, all covered in this section — where guide bar movements are chained course by course, but the same principle serves other textile mechanisms. Ordering is by machine maker, model and the pattern repeat required, or by supplying the worn wheel or chain as the pattern for its replacement. Betex supports the range with the service model warp knitting mills depend on: jacks, sinkers and spare parts supplied uncomplicated, reliable and quick from a very big stock, with worldwide logistical partners delivering immediately and technical help available by telephone.

Companies Supplying Patterning

Betex

At Betex (Germany) you can obtain pattern wheels and pattern chains in all variations — complete and ready for use, in all sizes, and for every type of machine. Betex supplies jacks, sinkers and spare parts for the textile industry from a very big stock, delivered immediately through worldwide operating logistical partners, and its range covers tricot machine parts, Raschel machinery parts, stitch bonding machine parts, loose needles, thread break guards and guide units.

Supplies: Pattern Wheels · Pattern Chains · Tricot Parts · Raschel Parts · Guide Units · Loose Needles

Related Guides and Resources

Common Questions

How does a pattern chain programme a machine?

Chain links of different heights pass a reading mechanism course by course; each link's height commands a guide bar or motion position, so the assembled sequence of links is the pattern.

Are pattern wheels and chains machine-specific?

Entirely — they are made complete and ready for use, in all sizes, for every type of machine, and ordered by maker, model and pattern repeat, or from the worn part as a sample.

Do modern machines still use mechanical patterning?

Many do. Large fleets of warp knitting and other machines run on wheels and chains, which is why complete replacement patterning remains a stocked spare parts line.

More from Apparel Search: Textile Machinery  |  Manufacturing  |  Fashion Terms  |  Fashion Companies  |  Fashion Influence  |  Fashion Industry
You are here: Apparel Search » Textile Machinery » Textile Machinery Spare Parts » Patterning