Yarn Retainer for Textile Machinery

Textile and clothing machine spare parts — what the part does, how to specify it, and the companies that supply it.

A yarn retainer does a quiet but essential job on a knitting machine: it holds a yarn end — a tail at a colour change, an idle stripe yarn, a new end waiting to be introduced — securely out of the knitting zone until the machine needs it, then lets it go cleanly when it is called. Without retention, loose ends drift into the needles, get knitted in as faults, tangle with running yarns or trail across the fabric. Retainers are small clamping or gripping devices fitted at the feeds, and because they handle yarn constantly their gripping surfaces are working parts that wear.

Yarn Retainer for textile machinery — spare parts in a textile machinery workshop

Holding Ends at Stripers and Colour Changes

The retainer earns its place wherever a machine works with more yarns than it is knitting at one moment. Striper and pattern machines carry several yarn fingers at a feed, only one of them knitting; the idle ends must be parked — held firmly enough not to slip, gently enough not to be damaged, and released without a snatch when the finger changes. The same need arises at course and garment changes on flat knitting machines, where ends are held between panels. A retainer whose grip has weakened lets an end creep into the knitting zone, and the fault appears courses later as a trapped tail or a pulled loop that inspection may miss until the fabric is made up.

Retainers sit within a wider family of yarn-handling parts at the feed — supervisors, sensors and control devices — each doing one small job that together keep yarn behaviour orderly at production speed. The holding action itself has to walk a fine line. Grip too hard and the retainer marks or weakens the yarn it holds, so the end breaks at the moment it is introduced; grip too softly and vibration and air currents work the end free between changes. The gripping faces therefore wear smooth with use and pick up lint and finish, both of which soften the hold, so retainers are cleaned with the feed area and their grip tested by hand whenever a machine is rethreaded or a stripe pattern is changed — a two-second check that prevents a whole roll of faults.

Retainers from a Knitting Parts Maker

RMB Massardi of Italy, listed below, manufactures yarn retainers as part of its range of parts for circular and flat knitting machines. That range places the retainer alongside the maker's other feed-area components — slide electronic yarn control devices, yarn supervisors by drop and by tearing, yarn sensors, safe needles, bulb sockets and electric shears — so a mill can source the feed's yarn-handling parts from one specialist. When ordering retainers, specify the machine make and model and the feed or finger position the retainer serves, and replace weak-gripping units promptly: a retainer is inexpensive, while the fabric faults from a wandering yarn end run the length of a roll.

Companies Supplying Yarn Retainer

RMB Massardi

RMB Massardi (Italy) manufactures yarn retainers within its range of parts for circular and flat knitting machines. The range also includes safe needles, slide electronic yarn control devices, yarn supervisors by drop, by tearing and by tearing and drop, yarn sensors, bulb sockets and electric shears.

Supplies: Yarn Retainers · Safe Needles · Yarn Control Devices · Yarn Supervisors · Yarn Sensors · Electric Shears

Related Guides and Resources

Common Questions

What is a yarn retainer on a knitting machine?

A small holding device at the feed that keeps an idle yarn end or tail — at a striper finger or a colour change — parked safely out of the knitting zone until it is needed, then releases it cleanly into the feed.

What happens when a retainer loses its grip?

The held end creeps or falls into the knitting zone and is knitted in, causing trapped tails, pulled loops and fabric faults that may only surface when the fabric is inspected or made up.

Is a yarn retainer the same as a yarn sensor?

No. A retainer holds yarn; a sensor watches it. Retainers are mechanical holding parts at the feed, while sensors detect yarn presence or breakage and signal the machine to stop.

More from Apparel Search: Textile Machinery  |  Manufacturing  |  Fashion Terms  |  Fashion Companies  |  Fashion Influence  |  Fashion Industry
You are here: Apparel Search » Textile Machinery » Textile Machinery Spare Parts » Yarn Retainer